Honda Phantom HID’s installation

Hi everyone, well I decided to come up with this little step by step guide showing how I installed my new JLM HID lights on my 2011 Honda Phantom. I was very surprised how there’s no much information about how to do it and well I decided to share my experience with those looking for a better insight of what you can expect to see and how to approach it (not to say that my way is the only one, but it worked pretty well for me). As always, if you have a better method to do this leave a comment or let me know; is nice we can all contribute/share how to make things better.

Here we go,

What HID Temperature should I get?

So I was doing some research about which HID’s are best for my motorcycle. Obviously this was a very ambiguous question since depending on temperature this lights change their color. So for starters, what color would fit best? but not only that, which is best for getting noticed on the road by that driver that is on the phone talking BS with their BF, or BFF or what ever (by the way I hate Acronyms) but paying attention to their surrounding. I found that the right HID temperature would be anything no more than 6K. In many blogs people say the light tends to get some blueish/purple/reddish and also strains your eyes, plus defaults the whole purpose of illumination. In My own experience I had installed HID kits in my cars and used the 5K and 12K. 12K lights look nice, are very stylish for any vehicle but they are not the best for the road. I noticed that it works great with any reflective objects but if the object it is not reflective it wont illuminate it much. Is like you get no depth… and if there is no reflective markers on the road, you can consider yourself driving blind pretty much. 5K lights are the ones that give you the most in color and road illumination; they add a slick look to your ride and have a very powerful reach, in my opinion the best ones. But not for this case. In my opinion a motorcycles need to call as much attention on the road as possible and should stand out from other vehicles (I Rather “Becky” tell her “BFF” on the phone “There’s a fu*** assh*** riding a motorcycle behind me” other than “Oh I didn’t see him behind me, I was way too busy on the phone”) for this reason I ordered a 3K light bulb with my HID kit. That way that deep yellow light will call “Becky’s” attention and anyone next to her. I have to admit that it is not very easy on your eyes at first but it works like a charm for me. Here’s a chart I got from somewhere in google so you can have a reference Temp/Color.

I got my kit from amazon, is a H4 JLM HID kit. The kit was $65.39 including shipping. Unfortunately I didn’t found a slim version (This means that the Balast is thinner than a conventional one, very useful for motorcycles because the lack of space) and I thought this was going to be a problem. But It worked Just fine. Also there is a cheaper HID Kit XENTEC brand. I had bought this before and they don’t last much, you will find yourself replacing the Balasts sooner than what you think. Just saying…

-Get Dirty!

1).Read/print or memorize steps on Mike’s Blog and execute until step 8.

 

2).Once you are done with that you will find yourself with something that looks similar to this. It gets tricky to get the hook back to its place since the HID bulb is longer and has a different shape. Once the change is made you wont be able to put the dust cover on it. Save it somewhere, don’t trash it. You never know.

 

 

 

 

 

 

Before you move on, I suggest you to stop and test your kit, many times the balasts don’t work or the bulbs are bad even if they are new. You don’t want to spend all your time making a nice installation and then realize it doesn’t work. Just plug the light’s power supply to the Balast and plug the bulb to the round ends. Remember red to red and black to Transparent (Red positive, Black Ground) always remember this when installing your kit.

One more thing to remember. You have a what is called a closed circuit. If any of the color coded connectors you see is not well connected or gets loose, you will open the circuit and loose the power loop that runs the entire electrical system of your bike. Including your starter. Something to keep in mind. Be calm, don’t freak out and enjoy what you are doing. Keep going…

3. Ok, Saying that your kit is good to go, you need to un-plug all the color coded connectors and get the light casing out of the way. You will notice that there is a bold thermal wrapper that holds all the cables you need in one big “tube”. And you should be looking at something like this.

 

 

 

 

 

 

 

 

4. Separate te cables that you are going to re-route from the ones that are going to stay in the same place (inside the light case).

 

 

 

 

 

 

 

 

 

TIP: Work with your fork leaning towards the right. This way you know what is the max cable extension and you are not going to get short in wire or strangle any wires when you make turns.

Before you continue, you need to remove the plastic covers that are located at the front sides of the bike. You will do this by removing a small metallic piece that holds them together on the top.

5. Use an exacto knife to cut the thermal cover that wraps all your cables together. Be super careful, take your time to do this. You don’t want to cut any wires inside there. Also, you don’t need to cut it all the way through, maybe just an inch before it meets the other end.

As you also have noticed, I had already placed the balast and connected the power supply.

Once you have this done, Is time for you to test your connections and see that everything is working. Also use some belts to secure the connection and the balast to other parts that are firm. Try not to leave anything loose. This way you will avoid changing any pieces.

You might notice that placing the balast is the toughest part, but once you are done with that, the rest is a piece of cake. I might say I will remove the gas tank and secure this part better soon and if you have time, I suggest you do that too. It might take a little longer but it will make a difference in the long run.

6. Once you have placed everything, is time to wrap up the cables that got loose when you cut the wrapper and begin to incorporate all the cables back in to the headlight cover. Since all cables are color coded should be easy for you to connect everything back together. Try to be organized and to distribute all the cables along the inside of the casing. I will suggest you to plug everything and leave the two light connectors for last.

7. Get back to Mike’s Blog and continue from step 13.

8. In step 15 I decided to put a little of medium thread-locking fluid, since the vibration might get some of those screws loose.

 

 

 

 

 

 

 

Well, and this is how it looks now. I hope this works for you as it did for me.

 

 

Optus. It’s Possible.

Great concept, awesome product

http://youtu.be/iINejQiaWpk
Design Concept & Treatment + look development and Compositing of Launch commercial for Optus Communications data cloud service.

Concept + Design Direction for Optus Data World

Directed by Mick Wong at GoodOil Film

Wacom’s solution for mobile touch screens

Nowadays is very rare to find CG Artists that still use the very classic “mouse”. Instead, stylus and tablets are taking over for many reasons; some say is faster other say is convenient  and I have also heard people say is even healthier (they refer to the Carpal tunnel problem you develop by using a mouse over the years). Wacom has developed products with quite a good reputation, not to mention it is an industry standard and because of these reasons their product line has tu keep up with the daily changing and competitive computer market.

The Bamboo Stylus pocket is a very clever tool developed for those who live on the go! it weights less than 17g and comes in with separate color rings to give it some personality. It’s not only designed to be very portable (there’s a rubber-nibbed tether that fits into your device’s earphone jack), but it is tweaked to work great with Wacom’s app Bamboo Paper.

For only $34.95 you can get this little gadget that will push  your creativity anywhere anytime!

 

For more details head over to:

http://www.wacom.com/en/products/bamboo/bamboostylus/pocket.aspx

Don’t forget to get the Bamboo Paper App for your tablet – It’s free

Lamborghini “Supernova”

I have always love the Automobile industry, but lamborghini has always drawn my attention. It is rare to see lambo commercials, but lately I have found a couple and to be true to you this pieces are as awesome as the cars they build.  Brussels 3D Specialists Digital Golem and MPC Creative have pushed the limits in lighting and rendering in this awesome :60 piece. I hope you enjoy it as much as I did.

Lamborghini “Supernova”

——————————

Just in case you are like to watch the other spot I’m talking about

Lamborghini aventador spot

 

Inked fragmented Portraits

These amazing Incredible Fragmented Ink Portraits in Water are really one of a kind and what makes it more interesting is that, it is done by a self-taught Italian artist Alberto Seveso.

The artist represented various pretty girls faces in fragmented swirls of colors that are scattered across the canvas. The artist is well known for his ink water portraits all over the Italy. These beautiful models have fair and smooth skin with silky lips and the fragments are placed in such a position that we can easily recognize the model by filling out the missing parts mentally.

Click here to visit website.

“Mists of Pandaria”

I’ve never been a fan of “world of Warcraft”. To be true, I’m really scared to get hooked on it and stop going to work or going to the gym and stuff like that. Sounds funny but for a video game addict like me things like this can really happen. Let’s say I’m trying to be responsible ;). Blizzard team has a reputation for great CG game cinematics and trailers, in this Clip for World of Warcraft’s fourth expansion set “Mists of Pandaria” we find a very common Panda with a very un-usual set of skills and clever humor that will show you a place we all have dreamed of.

Sit back, relax and when you are ready click here to give your mind wings.

Bell 500 Project

****A little blah blah blah… Well, it has been quite a while since I stepped out of the routine and started a project on my own. We all always find ways to blame it on work or daily situations not to do many things, but well… thanks to Santa for my new Honda Phantom I have a new reason to work late at night in something that lately I find quite interesting, Motorcycle Helmets.

When I got my motorcycle I barely had experience in riding. To be sincere, I had ridden two or maybe three times in my life. But never a motorcycle with an engine that was bigger than 250cc. Choosing the bike  wasn’t an easy task. Im not into those “Crotch rockets” (nothing against those who do) but I do love power and being noticed is certainly a big plus. Choppers, in this case bobber’s seem to be the right fit for me. To ride a chopper you need the right accessories, Helmet, Leather jacket, gloves, boots… etc… So, browsing the web I came across the amazing an most “badass” helmet: the Bell 500 custom. Bell brought back the old “500”  by Roy Richter from 1954 and taking advantage of nowadays materials and techniques gave us this beautiful, safe, state of the art helmet.   For me as an artist I try to carry and display art in most places I can…  what a better place that in my head, ridding safe and enjoying every second of it. I think there are no other worlds to describe it other than pure visual candy! Ok.. Where’s the C4D part!? So my idea is to try to come up with some nice graphics for this helmet, using C4D, photoshop and Illustrator  but in my very own way. I’m a visual person, I like to see before doing! envisioning is something that drives me crazy!. For that reason I’m going to start from scratch: taking pictures, making blueprints, modeling, texturing and lighting this baby.   The point of doing this is to record a progression have fun; this is not intended to be a tutorial in anyway, but if you find this inspiring and you get questions feel free to leave a comment. Maybe you know a way to skip or to make something easier or better yet… faster. Just let me know, every day I’m learning… ain’t we all?

 

Cool tools

 

I’m Always looking forward to optimize my workflow as much as I can, Browsing the web I came across this very  useful website full of free apps that everyone should have. I’m pretty sure you are going to end up trying at least one!… give it a try and Let me know how it goes.

Freelancing trends

 

Freelancers are known for gathering day in and day out at coffee houses and cafés all around NYC, but as the number of freelancers continues to grow, a few select bars are leading tons of laptop-wielding designers and writers to grab a heavier drink than usual.

50 Motion Graphics Tips

 

This is a very old article, but I still find it very useful… I hope it comes in handy for you too…

Whenever you’re working on a new motion graphics project, don’t start without reading this expert advice from the best in the business.

The motion graphics industry moves at a fast pace, with new developments in software and techniques all the time. So before you start work on a new project, check out the essential advice from our four experts…